Tuner Operation; Auto Memory Entry; Station Preset Memory; Preset Tuning - Kenwood KDC-BT742U Mode D'emploi

Tuner Operation

Auto Memory Entry

Putting stations with good reception in the memory
automatically.
1
Enter Auto Memory Entry mode
Select "AUTO MEMORY".
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Open Auto Memory Entry
Turn the [AUD] knob to select "YES", and then
press the [AUD] knob.
When 6 stations that can be received are put in the
memory, auto memory entry closes.

Station Preset Memory

Putting a station in the memory.
1
Select the frequency to put in the memory
Push the [AUD] knob towards right or left.
2
Enter Preset Memory mode
Press the [SEARCH] button.
3
Select the number to put in the memory
Turn the [AUD] knob or push it towards up or
down.
4
Determine the number to put in the memory
Press the [AUD] knob for at least 1 second.
Cancelling the Preset Memory mode
Press the [SEARCH] button.
14
|
KDC-BT742U/ KDC-X493/ KDC-MP442U

Preset Tuning

Recalling the stations in the memory.
1
Enter Preset Tuning Select mode
Press the [SEARCH] button.
2
Select a desired station in the memory
Turn the [AUD] knob or push it towards up or
down.
3
Recall the station
Press the [AUD] knob.
Cancelling Preset Tuning
Press the [SEARCH] button.
Function of remote control

Direct Access Tuning

Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [0], [9], [2], [1]
810 kHz (AM) [0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
⁄
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.