X'over Setting; Equalizer Control; Preset Position Setting - Kenwood KDC-BT742U Mode D'emploi

Function of KDC-BT742U
Audio Adjustments (DSP)

X'Over setting

You can set a X'Over value for the speakers;
Setting speaker Display
Front High Pass "FC"/
"FRONT" Filter "HPF F"
Rear High Pass "FC"/
"REAR" Filter "HPF R"
Subwoofer Speaker "FC"/
"SUB-W" Size "LPF SW"
Phase "FC"/
"SW PHASE"
1
Enter X'Over setting mode
Select "DSP" "SETUP"
>
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the X'Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
4
Exit X'Over setting mode
Press the [SEARCH] button.

Equalizer Control

You can adjust following Equalizer Control items.
iPod Equalizer can be set after connecting iPod and
selecting "iPod" in <System Q>. Select from the 22
equalizer types;
Adjustment Item Display
Preset System Q "EQ"
memory
"PRESET"
Equalizer Center "F0"
agjust Frequency
"MANUAL"/
Quality "Q"
"BAND"
Level "GAIN"
• The frequency which can be selected by each Frequency
band is shown below.
Band Frequency
"BAND1" 60/ 100/ 160/ 250/ 400 Hz
"BAND2" 630/ 1k/ 1.6k/ 2.5k Hz
"BAND3" 4/ 6.3/ 10/ 16 kHz
24
|
KDC-BT742U/ KDC-X493/ KDC-MP442U
Range
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
40/ 60/ 70/ 80/ 100/ 120/150 /
180/ 220/ THRU (Through) Hz
REVERSE (180°)/ NORMAL (0°)
"X'OVER".
>
Range
"NATURAL" (Natural)/ "USER"/
"ROCK" (Rock)/ "POPS" (Pops)/
"EASY" (Easy)/ "TOP40" (Top 40)/
"JAZZ" (Jazz)/ "GAME" (Game)/
"iPod"
Refer to the followings.
0.25/ 0.50/ 1.00/ 2.00
–9/ -7/ -5/ -3/ -2/ -1/ 0/ +1/
+2/ +3/ +5/ +7/ +9
1
Enter Equalizer Control mode
Select "DSP" "CONTROL"
>
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
iPod Equalizer
1. Enter iPod Equalizer mode
Press the [AUD] button.
2. Set the value
Turn the [AUD] knob and push the center
when the desired item is displayed.
4
Exit Equalizer Control mode
Press the [SEARCH] button.

Preset position setting

According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Compensation seat
Not compensating.
Front-Left seat
Front-Right seat
Front seat
1
Enter Position setting mode
Select "DSP" "CONTROL"
>
"PRESET".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Exit Position setting mode
Press the [SEARCH] button.
"EQ".
>
Range
"ALL"
"F-L"
"F-R"
"F-ALL"
"POSITION"
> >