Other Settings Installer; Factory Setting - Brink Renovent Excellent 300 Consignes D'installation

Putting into operation
The factory supplies the Renovent Excellent for the Renovent
for the Renovent Excellent 400 set to 50, 100, 200 and 300
m 3 /h respectively. The performance and the energy consump-
tion of the Renovent Excellent depend on the pressure drop in
Important:
Mode : is 0 or 50 m 3 /h (not in combination with a 3-way
switch).
Mode 1: must always be lower than mode 2.
Mode 2: must always be lower than mode 3;
Mode 3: Renovent 300 - adjustable between 50 and 300 m
Renovent 400 - adjustable between 50 and 400 m
higher mode will automatically be adjusted.

7.3 Other settings installer

Various other settings of the Renovent Excellent can also be

7.4 Factory setting

ting in one go.
Renovent Excellent was supplied from the factory; all message
codes / fault codes will be erased from the service menu as
well.
3
/h and
3
/h;
3
/h;
-
Renovent Excellent
Chapter 7
press > 10 sec.
simultaneously
3 sec. visible
operating mode
23