Service Menu - Brink Renovent Excellent 300 Consignes D'installation

Display

6.5 Service menu

The service menu shows the most recent 10 fault messages.
In the event of a locking fault, the settings menu and the readout
menu are blocked and only the service menu can be opened;
Pressing the 'menu' key directly opens the service menu.
The service menu can be displayed as follows.
1. In operating mode, press the 'MENU'- key. The display
now shows the settings menu.
2. Use the '+' and the '-'- ' key to go to the service menu.
service menu
3. Activate the service menu.
operating mode
settings menu
Fault code; refer to
§ 8.1 and§ 8.2
for explanation fault
code
No. fault message
Renovent Excellent
4 Use the '+' and the '-' key to scroll through the messages
in the service menu.
- Display not any fault message.
- Current fault message (spanner on display).
- Unsolved fault message (no spanner on display).
5 Press the 'R' key twice to go back to operating mode.
If no key is operated during 5 minutes, the appliance auto-
matically returns to operating mode.
operating mode
the service menu during 5 seconds; This is only possible when
there is no active fault!
Chapter 6
2 x
21