Menu Structure Display 6; Diagram Menu Structure 6.5 - Brink Renovent HR Medium Consignes D'installation

Chapter 6
6.5 Menu structure display
The menu structure is divided into a readout section and a set-
tings section.
The number of visible parameters depends on the parameter
set. The user has the parameter set "user"; a more comprehen-
6.5.1 Diagram menu structure
Operating condition
Press key "OK" and "-" > second
Press "OK" key
Press "OK" key
Press "+" and "-" key
Press "OK" and "F"- key > 3 seconds
Press "F" - key > 3 seconds
- Press key "OK" > 1 second
- If no key is operated during 1 minute
- If no key is operated during 1 minute
Press key "F"
20
Switching off the appliance
Reset fault
Display user data
Press "+" or "-" key
Readout menu installer
Press "+" or "-" key
Press "+" or "-" key
Select parameters:
- standard U1 - U8
- with option pcb (n.a.) U1 - U8
Press "OK"> 1 second to
display the selected parameter
setting
Press keys "+" or "-"
Modify selected
setting
Press key "F" or "+" -
Press key "F" or "-" -
Factory setting
Press key "OK" -
Do not save
Renovent HR Medium/Large
sive readout programme is available for the installer. It can be
activated by simultaneously pressing keys "F" and "OK" during
3 seconds.
Press key "OK" and "+" > second
- If no key is operated during 5 minutes
- If no key is operated during 5 minutes
Display installer data.
- Press key "F" > 1 second
- If no key is operated during 5 minutes
Settings menu
User Installer
- Press key "F" and "OK" > 3 seconds
Activate parameter set
installer
Press "+" or "-" -
Select parameters:
- standard U1 - U8
I1 - I14
- with option pcb U1 - U8
(n.a.) I1 - I19
P1 - P17
Press "OK"> 1 second to
display the selected
parameters
Press key "+" or "-" -
Modify selected
setting
Press key "F" or "+" > 1 second
Press key "F" or "-" > 1 second
Press key "OK" > 1 second
Putting into operation
Switching on the appliance
- Press key "OK" > 1 second
- If no key is operated during 1 minute
Press key "F"
Restore all
Factory settings
- If no key is operated during 1 minute
Press key "F"
Factory setting
Do not save
5679-0