Connecting The Opentherm Connector 5.5; Connecting The Power Plug 5.5 - Brink Renovent HR Medium Consignes D'installation

Chapter 5
5.5.2 Connecting the OpenTherm connector
In combination with demand-controlled ventilation, the ap-
pliance can also be controlled with the OpenTherm protocol
instead of as low-voltage switch. OpenTherm allows continu-
5.5.3 Connecting the power plug
The appliance can be connected to an easily accessible,
earthed wall socket with the plug that is mounted to the ap-
pliance. The electric installation must comply with the require-
ments of your power company.
12
tage cable with a core diameter of at least 0.8 mm must be
used as connecting cable. Interchanging the cable connection
- ce's performance.
Renovent HR Medium/Large
Installation
Warning
The fans and control print carry a high voltage.
Always take the voltage from the appliance by
pulling the mains plug when working on the ap-
pliance.
-