Fault; Trouble Shooting 7; Filter Fouled Indication 7 - Brink Renovent HR Medium Consignes D'installation

Chapter 7
7.1 Trouble shooting
If the control system detects an error, this is shown on the dis-
play by means of a number, preceded by a letter F (Failure). If
3-way switch will also start blinking.
The examples shown here is the error F9.; this means some-
thing is wrong with the wiring to the atmospheric temperature
sensor or with the sensor itself.
7.2 Filter indication
If the display shows the message " FIL" then this means the
tion has been mounted (= option), then simultaneously with this
message on the display, the LED on the switch will light up.
24
The appliance remains in this error mode until the problem in
question has been solved. Then the appliance will reset itself
(auto reset) and the display will once more show operational
mode.
The table to section 7.3 gives an overview of the errors, pos-
sible causes and the actions to be undertaken.
-
The text "FIL" will blink for a moment and then the display will
return to operational mode.
Renovent HR Medium/Large

Fault

OK"
5596-0