Readout Menu - Brink Renovent Excellent 300 Consignes D'installation

Chapter 6

6.4 Readout menu

The readout menu can be used to call up a number of
current sensor values to obtain more information on
the appliance's performance. Modifying values of set-
tings is not possible in the readout menu. The readout
menu can be displayed as follows.
1. In operating mode, press the 'MENU' key. Now the display
shows the settings menu.
operating mode
settings menu
2. Use the '+' and the '-' key to go to the readout menu.
readout menu
Step no. readout
Description readout value
value
01 Current temperature from dwelling
02 Current temperature outdoors sensor
03 Bypass status (ON = bypass valve open, OFF = bypass valve closed)
04 Status frost protection (ON = frost protection active, OFF = frost protection not active)
05 Current channel pressure supply
06 Current duct pressure extract
07
08
09 Actual relative humidity (Plus version)
20
3. Activate the readout menu.
4 Use the '+' and the '-' key to scroll through the rear menu.
5 Press the 'R' key twice to go back to operating mode.
If no key is operated during 5 minutes, the appliance auto-
matically returns to operating mode.
Renovent Excellent
Display
readout value
Step no. readout value;
refer to the table below
for an explanation
operating mode
2 x
Unit
°C
o
C
Pa
Pa
3
m /h
3
m /h
%