Display Image; General Explanation Control Panel - Brink Renovent Excellent 300 Consignes D'installation

Chapter 6

6.1 General explanation control panel

The LCD display shows what the operating situation of the ap-
pliance is. Four control keys can be used to call up and modify
settings in the control unit program.
When the mains power to the Renovent Excellent is switched on,
all display symbols will appear during 2 seconds; at the same time
the blue backlight is switched on for 60 seconds..
When one of the control keys is operated, the display will light
up during 30 seconds.
When no keys are operated or when no deviating situation has
developed (such as a blocking fault) the display will show the
operating mode (see § 6.2).
Key Function key
Menu
- Scroll; modify value; Switching on or off the Renovent Excellent from operating mode (the press for 5 seconds)
+ Scroll; modify value
R
16
to select from three different menus, including:
Settings menu (SET); see § 6.3
Readout menu (READ), see § 6.4
Service menu (SERV), see § 6.5
Press the R key to leave any menu and return to operating
mode.
the display backlight without changing anything in the menu.
A
B
C
Renovent Excellent

Display image

A = LCD
B = 4 control keys
C = service connector