Operating Mode; Status System Fan - Brink Renovent Excellent 300 Consignes D'installation

Display

6.2 Operating mode

In operating mode the display may simultaneously show 4 dif-
ferent situations/values.
1 = Status fan situation, image coupled appliances (see
§ 6.2.1)
(see § 6.2.2)
3 = Message text
nal switch contact etc. (see § 6.2.3)
4 = Fault symbol (see § 8.1 and § 8.2)

6.2.1 Status system fan

This part of the display shows a fan together with a num-
ber.
When the supply and extract fans are running, the fan sym-
bol is displayed. When the fans are stopped, the fan symbol
is not visible.
The number behind the fan symbol indicates the fan si-
tuation. Refer to the table below for an explanation of the
numbers.
Status fan
Description
situation on display
The supply and extrad fans are running at 50 m
This situation depends on setting parameter 1 (see Chapter 13)
The supply and extract fans are running under mode 1 of the multiple switch.
1
The supply and extract fans are running under mode 2 of the multiple switch.
2
The supply and extract fans are running under mode 3 of the multiple switch.
3
This Renovent Excellent is coupled with the aid of eBus.
The supply and extract fans of the Renovent Excellent are running under switched mode of the ventila-
number of the relevant Renovent.
1)
When using a 3-way switch, the position
differ, for instance when using an external switch contact, in
When the appliance is switched off through software, the
-
3 /h or are inactive.
can not be used.
Renovent Excellent
Chapter 6
1)
17