Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before using this machine, please carefully read though these HANDLING INSTRUCTIONS. Ensure that
you know how the machine works, and how it should be operated. Maintain the machine in accordance
with the instructions, and make certain that the machine work correctly, please store this instruction and
other enclosed documents with the machine together.
Do not place hand or fingers
close to the blade.
Laser radiation. Do not look into the beam!
Wear ear protection
PROFILE OF THE MACHINE (with standard accessories)
1.
Circular saw blade
2.
Rotating blade guard
3.
Spindle lock button
4.
Release latch
5.
Motor housing
6.
Operating handle
7.
Carbon brush cover
8.
Dust bag
9.
Laser light
Standard accessories:
- 1 TCT circular saw blade Ø250x3.3x30 40T for wood
- 1 Hex/Cross key
Check for damage to the tool, parts or accessories which may have occurred during transport.
- Voltage - Frequency: 230 V - 1~50 Hz
- Motor power: 2000 W – 2.7 CV
- Rotation speed: 5000 rpm
- Saw blade diameter: Ø255 mm
- Saw blade bore: Ø30 mm
- Restriction: Use only blades which conform to EN 847-1
- Mitre table angles: 0° to 47° Left and Right
- Bevel cuts: 0° to 2° Right and 48° Left
- Cutting capacities Max. (Width x Height):
- Mitre 0° & Bevel 0°: 305 x 75 mm
- Mitre 45° & Bevel 0°: 210 x 75 mm
- Mitre 0° & Bevel 45° to the Left: 305 x 36 mm
- Mitre 45° & Bevel 45° to the Left: 210 x 36 mm
- Dust hose connector: Ø41 mm
- Degree of protection: IP20
- Protection class: II
- Overall dimensions (LxWxH): 720 x 985 x560 mm
- Net weight: 14 kg
Sound level (according to EN 60745):
- Sound pressure level: LpA = 94.3 dB(A)
GB
SYMBOLS
TECHNICAL SPECIFICATIONS
24
Double insulation
Wear eye protection
Wear dust mask
10.
Bevel lock knob
11.
Cable with plug
12.
Fence
13.
Base with fixing holes
14.
Mitre latch
15.
Miter lock handle
16.
Extension table bar
17.
Vertical clamp
Document:
- Instruction manual (original in English)
Publicité
Table des Matières
