Switching Off The Scales; Resetting The Scales; Cleaning - ADE Bridget Mode D'emploi

Switching off the scales

− Hold down until the indicator on the display goes out.
The scales automatically switch off,
‚ when it is not used for approx. 1 minute (weighing surface is empty) or
‚ when it is not used for approx. 3 minutes and there are still objects on
the weighing surface.

Resetting the scales

Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries. Pay attention to the correct polarity of the batteries (+/-). The
plus pole (+) must point upwards.
After switching the scales on, you can start weighing as usual.

Cleaning

NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scales. If you do, the surface
could be scratched.
The scales should be cleaned immediately after use, especially if they have come
into contact with fat or oil, spices, vinegar, and other strongly spiced and/or coloured
foodstuffs.
− Wipe down the scales as needed using a lightly dampened, soft cloth. Avoid
contact with citric acid.
Office Scales KE 1700
Resetting the scales
19