Operation; Weighing; Resetting The Scale To Zero; Using The Tare Function (Tara) - ADE SLIM KE 863 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Operation

Operation

Weighing

1. Place the scale on an even, firm, and dry surface. Carefully position the scale in order
to avoid hard impacts to the sensors/feet and therefore to avoid damage.
2. Switch on the scale by pressing with a little force on the weighing surface for 2 seconds.
3. Choose the desired unit of measurement by repeatedly touching UNIT.
Choose from "g" (gramme), "fl.oz. " (fluid ounce), "lb.oz" (pound) and "ml" (millilitre).
Pay attention to the indicator on the display.
Choose "ml" if you would like to weigh liquids.
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in point 6.
5. Press TARE. "0" is shown on the display.
6. Put the substance to be weighed in the container or place it on the weighing
surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Resetting the scale to zero

If the display still shows a minus value (symbol ) even though the weighing surface is
empty (for example, if the scale is not optimally positioned or a TARE value is still
displayed; see next section), you must reset the scale to zero.
− Briefly press TARE 1x.

Using the tare function (TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press TARE in order to set the scale back to "0". "TARE" is shown on the display.
2. Add the new substance. The weight of the added substance is shown on the
display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scale

− Hold down TARE until the indicator on the display goes out.
The scale automatically switch off if they are not used for
approx. 2 minutes.
18
Kitchen scale KE 863

Publicité

Table des Matières
loading

Table des Matières