Set The Scale To Zero; Using The Tare Function.(Tara); Switching Off The Scales; Resetting The Scales - ADE Cleo KE 1713 Mode D'emploi

Resetting the scales

4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in point 6.
5. Press /TARE. "0" is shown on the display.
6. Put the substance to be weighed in the container or place it on the weighing surface.
The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Set the scale to zero

If the display still shows values even if the weighing surface is empty (e.g. if the scales
are not optimally positioned or a TARE value is still displayed, see next section), you
must set the scales to zero.
− Briefly press

Using the tare function.(TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press /TARE in order to set the scales back to "0".
If the weight on the weighing surface is greater than 200 grams,
shown on the display (tare function).
2. Add the new substance. The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scales

− Hold down
/TARE until the indicator on the display goes out.
The scales automatically switch off if they are not used for approx. 2 minutes.
Resetting the scales
Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries. Pay attention to the correct polarity of the batteries (+/-).
After switching the scales on, you can start weighing as usual.
18
/TARE 1x.
Kitchen scales KE 1713 | KE 1714 | KE 1715 | KE 1732
is