Resetting The Scale To Zero; Adding Items Or Substances (Tare); Switching Off The Scale; Resetting The Scale - ADE Mira Mode D'emploi

Resetting the scale

7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Resetting the scale to zero

If the display still shows values even though the weighing surface is empty (e.g. if the
scale is not optimally positioned or a TARE value is still displayed; see next section), you
must reset the scale to zero.
− Briefly press OFF/TARE once.

Adding items or substances (TARE)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press OFF/TARE to reset the scale to "0". "TARE" is shown on the display.
2. Add the new item or substance. The weight of the added item or substance is
shown on the display.
3. Repeat the process whenever you would like to add more ingredients. The process
can be repeated as often as needed until the capacity limit (10 kg) is reached.

Switching off the scale

− Press and hold down OFF/TARE until the indication on the display goes out.
The scale will turn off automatically if it is not used for approx. 60 seconds.
Resetting the scale
Reset the scale to its default settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Reinsert the batteries.
Pay attention to the correct polarity of the batteries (+/-).
After switching on the scale, you can start weighing as usual.
18
Digital Kitchen Scale KE 1733