sylvac PLC Mode D'emploi page 81

Master parameters sent to the instrument
Commands
(ascii byte)
"P"
"S"
"V"
"W"
Parameters
4-bytes-preset
10-bytes-ID
2-bytes-Mode
2-bytes-Argument
1-byte-Action
Explanation
A new 32 bits float preset value expressed in µm
If 10-bytes-ID matches the received ID, then instrument stores its new address.
New address : 0...247 (0 for unconfigure the instrument)
0x0000 : normal mode
0x000A : synchronized mode (not used)
0x0014 : sampled mode
Argument : not used
0x00 : clears memory (not used)
0x01 : starts synchronization (not used)
0x02 : stops synchronization (not used)
0x03 : takes and stores a sample (reads it with "L")
Mode
Action