sylvac PLC Mode D'emploi page 15

9. Personalising the instrument
Access to the functions of your instrument can be personalised, for more information see manufacturer's website (requires
you to connect your instrument via a Proximity cable (RS or USB).
Possibilities :
- De-activate or active the required functions
- Modify access to the advanced functions (direct access)
10. Connecting the instrument
The instrument can be connected to a peripheral via a Proximity cable (RS232 or USB), or via one of the RS485 buses.
10.1 RS-232 or USB connection
Measured values can be transmitted and the instrument driven using predefined commands (see chap. 12 for a list of the
main retro-commands)
Note:
The result of the toleranced measurement is added to the position measurement (remote command?) in the form of a symbol.
= : the value is within the tolerances
< : The value is too small
> : The value is too large
15
E