Annexe Orbit Protocol - sylvac PLC Mode D'emploi

Where :
Address field : The slave number (same as Command)
Response field : Same as RS232-Proximity answers (see chapter 12)
End of Frame : Ascii CR (0x0D) or CRLF (0x0D, 0X0A)
C. Annexe ORBIT Protocol
Default RS485 configuration for Orbit protocol:
187'500 bauds
8 data bits
Odd parity
1 stop bit
C.1 ORBIT Transactions
The master issues an Orbit command frame on the bus. The addressed slave may or may not answer, depending of the command. For further
details about the Orbit protocol, refer to the Solartron© ORBIT Protocol.