Digital Outputs; Digital Inputs - sylvac PLC Mode D'emploi

10.4 Digital outputs

3 digital outputs permit a decision on the current measurement (out-
side upper tolerance, outside lower tolerance, between the 2 tole-
rances). The activation delay for the outputs is a maximum of 25 ms
after the measurement.
Type of outputs: Inactive -> open circuit. Active -> closed circuit to
GND.

10.5 Digital inputs

1 digital input permits Preset/Zero recall.
1 digital input permits execution of the Favourite button function. Factory configuration: data transmission.
The duration of the input pulse is a minimum of 40 ms
Input type: Without supply (activation by closure to GND).
OUTPUT
VCE.SAT
GND
GND
17
I.LOAD
LOAD
1000pF VDC : 9...24V
I.LOAD : max 250mA
VCE.SAT : max 0.3V
V.BAT : 9...24V
10kohms
INPUT
4700pF 1000pF
E