Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 . Operating features of the instrument
-
The instrument has two operating modes: basic functions (direct access) and advanced functions. In addition
MODE
to the configuration functions, 2 working reference functions can be accessed, in MIN, MAX and DELTA (TIR)
mode, plus tolerance dispay or input of multiplication factor other than 1:1 (see chaps. 3 and 4)
-
The «favourite» key gives direct access to the function used most often (see chap. 6)
-
Sets a Preset value, resets the MIN/MAX mode, verifies a selection, and controls switching off the instrument.
SET
- Personalising the functions
It is possible to activate or de-activate certain functions of the instrument via RS232 (see chap. 9)
- Data transmission parameters (RS-232 port, default values)
4800Bds, 7 bits, even parity, 2 stop bits
Data transmission parameters (RS-485 port, default values)
128'000Bds, 8 bits, even parity, 1 stop bit
7
E
Publicité
Table des Matières
