Delivery Contents - VOLTCRAFT CM-100 Notice D'emploi

An exclamation mark in a triangle shows important information in this user's manual that
has to be observed.
°
This product has been CE-tested and meets the necessary European guidelines.
The "hand" symbol indicates special information and advice on operation of the device.
For safety and licensing reasons (CE), unauthorised conversion and/or modification of the device is not
permitted.
Measuring instruments and accessories are not toys and have no place in the hands of children.
On industrial sites the accident prevention regulations of the association of the industrial workers' soci-
ety for electrical equipment and utilities must be followed.
CO is a colourless and odourless gas. Ensure your own safety during all measurements. In areas
2
where measured concentrations may be high, only place the sensor in the media / area to be measured.
In schools, training centres, computer and self-help workshops, handling of measuring instruments must
be supervised by trained personnel in a responsible manner.
Do not switch the measuring instrument on immediately after it has been taken from a cold to a warm
environment. The condensation generated could cause serious damage to the device. Allow the device
to reach room temperature before switching it on.
Do not leave packaging material lying around carelessly. This could be a dangerous toy for children.
The operation of the product is not permitted in areas where there is a danger of explosion.
You should also heed the safety instructions in each chapter of these instructions.
Delivery Content
CM-100 CO - measuring device
2
External measuring sensor
Plastic case
Operating instructions
19