System Settings (Settings) - Cameo OPUS H5 Manuel D'utilisation

SYSTEM SETTINGS (Settings)

Starting from the main display, press the rotary-push encoder to enter the main menu. Turn the encoder to select the system Settings
menu and press the encoder.
This will take you to the sub-menu for editing the sub-menu items, see table:
Settings
Select by turning, confirm by pressing, change value or status by turning, confirm by pressing. Back with BACK.
Lamp State
Default
Mode
Display Reverse
Backlight
Dimmer Curve
Off Lamp switched off
On Lamp switched on
Off Lamp switched off after restart
On Lamp switched on after restart
Last Status before switching off is restored after restart
Power Maximum brightness
Eco Reduced maximum brightness in the event of reduced fan speed
Off No display rotation
On Rotate display by 180°
Auto Automatic display rotation
Off Deactivation of display illumination after approx. 1 minute without input
On Display lighting permanently on
Linear Light intensity increases linearly with DMX value
Exp Light intensity can be finely adjusted at lower DMX values and broadly adjusted at
higher DMX values
Log Light intensity can be broadly adjusted at lower DMX values and finely adjusted at
higher DMX values
S-curve Light intensity can be finely adjusted at lower and higher DMX values and broadly
adjusted at medium DMX values
15