System Settings (Settings) - Cameo ROOT PAR TW Manuel D'utilisation

unit in the slave menu. This allows a chaser light effect to be easily created with any number of
spotlights of the same model and software version, which could otherwise only be achieved with
a suitable DMX controller and complex programming.
Main display with group number plus
delay time of the master unit
Assign the slave units to one of up to 15 groups as required. Several slave units can also be
assigned to one group. The group number is also the factor by which the set delay time on the
master unit is multiplied (see setup examples).

SYSTEM SETTINGS (SETTINGS)

Starting from the main display, press MODE to go to the main menu. Using UP and DOWN, now
select the Settings menu option and press ENTER to confirm.
This will take you to the submenu for setting the submenu options (see table, use UP and DOWN
to select, press ENTER to confirm, use UP and DOWN to change status/value, press ENTER to
confirm).
15