Dimmer Curves - Cameo OPUS H5 Manuel D'utilisation

Motor Pan Reverse
Tilt Reverse
Angle
Feedback
Color
position
Gobo
position
Color wheel
Gobo wheel
Blackout P/T
Blackout
Prism
Blackout
Gobo
Blackout
Color
Misc. Auto Lock
Signal Fail
Temp Unit
Set Def.
Values

DIMMER CURVES

linear
DMX value
16
Off Does not reverse pan direction
On Reverses pan direction
Off Does not reverse tilt direction
On Reverses tilt direction
630 630° pan angle
540 540° pan angle
Off Automatic position correction is disabled
On Automatic position correction is enabled
Stand Standard rotation of color wheel on color change
(standard)
Short Color wheel turns the shortest distance on color change
Stand Standard rotation of gobo wheel on gobo change
(standard)
Short Gobo wheel turns the shortest distance on gobo change
Scroll Color wheel offers continuously variable rotation
Snap Color wheel jumps directly back to the desired color filter when the relevant value is
reached
Scroll Gobo wheel offers continuously variable rotation
Snap Gobo wheel jumps directly back to the desired gobo when the relevant value is reached
Off No blackout during head movement
On Blackout during head movement
Off No blackout when value is changed in prism channel
On Blackout when value is changed in prism channel
Off No blackout when value is changed in gobo channel
On Blackout when value is changed in gobo channel
Off No blackout when value is changed in color wheel channel
On Blackout when value is changed in color wheel channel
Off Automatic locking of the controls is disabled
On Automatic locking of the controls after approximately 1 minute without input. Unlock:
Press encoder for approx. 5 seconds
Hold Last command is maintained if the control signal is interrupted
Scene 1 Scene 1 is activated if the control signal is interrupted
Fa.Out The spotlight is slowly dimmed down if the control signal is interrupted
Bla.out Instant blackout if the control signal is interrupted
°C Displays temperature in Celsius
°F Display in Fahrenheit
User A Save use settings A
User B Save user settings B
User C Save user settings C
exponential logarithmic
DMX value DMX value
S-curve
DMX value