System Components; Supplied Components And Accessories - Sony BRC-H900 Mode D'emploi

Compatible with VISCA over IP protocol
By inserting the BRBK-IP10 IP control card to this unit,
you can make an IP connection between this unit and
RM-IP10 IP Remote Controller.
When the IP connection is made, you can operate up to
112 cameras by using RM-IP10.
For details about necessary devices or functions for IP
connection, see "Operation Guide for Optional IP
Control."
External video sync function
The camera is equipped with an external video sync
function to synchronize the camera images on multiple
cameras. The camera also has an analog component/
RGB output connector as standard equipment.
Tally lamp
The tally lamp of the camera allows you to make sure it
is selected at a glance. The tally lamp on the front side
of the camera is large, enabling good visual recognition.
Also, the tally lamp on the rear side of the camera
enables good visual recognition from behind the
camera.

System Components

In order to support multiple system configurations, a
variety of optional products are available for the BRC-
H900 HD Color Video Camera. This section introduces
these optional products as well as the accessories
supplied with the camera.
Supplied Components and
Accessories
Before using the camera, make sure you have the
following components and accessories supplied.
Camera (1)
AC power adaptor MPA-AC1 (Sony) (1)
AC power cord (1)
USA and Canadian model
9
GB
System Components