Sony BRC-H900 Mode D'emploi page 11

BRBK-SF1 HD Optical Multiplex Card
Insert the card into the camera to allow high-bit
multiplex transfer via optical fiber cable (video, audio,
external video sync and control signals).
BRBK-HSD2 HD/SD-SDI Output Card
Insert the card into the camera to allow output of an HD-
SDI signal conforming to SMPTE 292 serial digital
interface standards, or output of an SD-SDI signal
conforming to SMPTE 259M serial digital interface
standards. An audio signal is not output from the card.
BRBK-SA1 Analog SD Output Card
Insert the card into the camera to allow output of various
SD analog signals such as composite video, S video,
component video, and RGB signals.
BRU-SF10 HD Optical Multiplex Unit
The HD Optical Multiplex Unit allows a connection of
up to 2,000 m (6,562 feet) using the CCFC-S200 2-core
optical fiber cable.
Supplied accessories: AC adaptor (1), AC power cord
(1), DC-cord secure connection attachment (1), RS-
232C connecting cable (3 m (9.8 feet)) (1), RS-422
connector plug (1)
CCFC-S200 Optical Fiber Cable
This is a 2-core single-mode optical fiber cable of 200 m
(656 feet) long.
Using the supplied extension plug allows transmission
of the video and control signal from a distance up to
2,000 m (6,562 feet).
Supplied accessories: extension plug (1)
Video Switcher (commercially available)
This switches the video signal input of multiple
cameras.
11
GB
System Components