Shooting With Back Lighting; Adjusting The White Balance; Adjusting The Brightness - Sony BRC-H900 Mode D'emploi

Shooting with Back Lighting

When you shoot a subject with a light source behind it,
the subject becomes dark. In such a case, press the
BACK LIGHT button.
To cancel the function, press the BACK LIGHT button
again.
Note
The BACK LIGHT function is effective if MODE is set
to FULL AUTO or BACK LIGHT in the EXPOSURE
menu of the camera. Each time you press the button, the
BACK LIGHT function toggles between on and off.
Shooting with spotlight compensation
If a portion of the shooting object is illuminated, the
spotlight compensation function adjusts the exposure to
a darker level. Hold down the SHIFT button and press
the BACK LIGHT button.
To cancel the function, hold down the SHIFT button and
press the BACK LIGHT button again.
Notes
• The backlighting and spotlight compensation
functions cannot be used simultaneously.
• The spotlight compensation function is effective if
MODE is set to FULL AUTO or SPOT LIGHT in the
EXPOSURE menu of the camera. Each time you press
the button, the BACK LIGHT function toggles
between on and off.

Adjusting the White Balance

Before adjusting the white balance, shoot a white object
under the same lighting conditions as the subject you
want to shoot, and zoom it in on the screen. (You can use
a white wall, etc., instead of the object.)
To adjust the white balance automatically
1
Set WHITE BALANCE to ONE PUSH in the
COLOR menu of the camera.
For setting, see "COLOR Menu" on page 33.
2
Press the ONE PUSH AWB button.
The white balance is adjusted automatically.
52
GB
Adjusting the Camera
BACK
LIGHT
ONE PUSH
AWB
To adjust the white balance manually
1
Set WHITE BALANCE to MANUAL in the
COLOR menu of the camera.
For setting, see "COLOR Menu" on page 33.
2
Press the MODE button so that the R and B
indicators on the VALUE/R and BRIGHT/B
controls light (white balance adjustment mode).
3
Adjust the red gain with the R control and the blue
gain with the B control.
VALUE
Turn toward – to
weaken red.
–
R
BRIGHT
Turn toward – to
weaken blue.
–
B
Functions of the R and B controls
When the white balance adjustment mode is selected
with the MODE button on the Remote Control Unit, the
functions of the R control and B control change
according to the WHITE BALANCE setting in the
COLOR menu of the camera.
WHITE R control
BALANCE
setting
MANUAL Red gain control
AUTO, OFFSET control
ONE PUSH

Adjusting the Brightness

1
Set MODE to SHUTTER Pri, IRIS Pri, GAIN Pri
or MANUAL in the EXPOSURE menu of the
camera.
For setting, see "EXPOSURE Menu" on page 32.
2
Press the MODE button so that the VALUE and
BRIGHT indicators on the VALUE/R and
BRIGHT/B controls light (Brightness adjustment
mode).
Turn toward + to
emphasize red.
+
MODE
Turn toward + to
emphasize blue.
+
B control
Blue gain control
OFFSET control