Sony BRC-H900 Mode D'emploi page 69

Notes
• When the connection using the Optical Fiber Cable is
made, the VISCA RS-232C and VISCA RS-422
connectors on the camera cannot be used.
• When using the VISCA RS-232C connectors or
VISCA RS-422 connectors, check the VISCA
FUNCTION switch on the rear of the Optical
Multiplex Unit (page 26) and the DIP switch on the
bottom of the Remote Control Unit (page 24) are set
to RS-232C or RS-422 correctly.
Notes on use of the CCFC-S200 HD Optical
Fiber Cable
• In order to prevent cable transmission loss, keep away
bend in the cable more than 40 mm (1 5/8 inches)
radius.
BRC-H900
BRU-SF10
CCFC-S200
Keep more than
40 mm (1 5/8
inches) radius.
CCFC-S200
• To connect two Optical Fiber Cables, use the
extension plug supplied with the cable.
Extension plug
B
A
69
GB
Connections