Sony BRC-H900 Mode D'emploi page 58

5
Attach the wire rope to the materials near the
ceiling.
Use an M5 (3/16 inch) hexagon socket head cap
screw (not supplied). Attach the wire rope to an
area independent of the area where the ceiling
bracket is attached.
M5 (3/16 inch)
hexagon socket head
cap screw
6
Attach the wire rope to the ceiling bracket (A).
Pass the wire rope through the fixing hole and
attach its end to the attachment hole on the bracket
using the supplied one screw (3M4 × 8).
Wire rope (supplied)
Caution
For attaching the wire rope to the bracket, use
only the supplied screw. Using another screw may
disable the function of the wire rope.
58
GB
Installation
Wire rope (supplied)
Attachment materials
Ceiling
Ceiling bracket (B)
3M4 × 8 (supplied)
Fixing hole for wire rope
Ceiling bracket (A)
7
Insert the protrusions on the ceiling bracket (A) into
the spaces prepared in the ceiling bracket (B) with
the a hole in the front of the ceiling bracket (A)
aligned with the hole on the ceiling bracket (B),
and temporarily attach them by turning the ceiling
bracket (A) with the camera clockwise.
Ceiling
hole
Align.
a hole
8
Secure the ceiling brackets (A) and (B) using the
supplied three screws (3M3 × 8).
Ceiling
Ceiling bracket (B)
1
Ceiling
bracket (A)
2
3M3 × 8
(supplied)