Product Description And Specifications; Intended Use; Product Features - Bosch UniversalDistance 50 Notice Originale

Do not direct the laser beam at persons or animals and do not look
directly into the laser beam or at its reflection. Doing so could lead to
blindless, or could cause accidents or damage to the eyes.
If laser radiation hits your eye, you must close your eyes and immediately turn
u
your head away from the beam.
Do not make any modifications to the laser equipment.
u
Do not use the laser goggles as protective goggles. The laser goggles make the
u
laser beam easier to see; they do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while driving. The laser goggles do
u
not provide full UV protection and impair your ability to see colours.
Have the measuring tool serviced only by a qualified specialist using only ori-
u
ginal replacement parts. This will ensure that the safety of the measuring tool is
maintained.
Do not let children use the laser measuring tool unsupervised. They could acci-
u
dentally dazzle someone.
Do not use the measuring tool in explosive atmospheres which contain flam-
u
mable liquids, gases or dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.

Product Description and Specifications

Intended Use

The measuring tool is intended for measuring distances, lengths, heights and clearances,
and for calculating areas and volumes.
The measuring tool is suitable for indoor use.

Product features

The numbering of the product features shown refers to the illustration of the measuring
tool on the graphic page.
(1) Reference level selection button
(2) Minus button [–]/navigation button
(3) Function button
(4) Measuring button [ ]
(5) Colour display
Bosch Power Tools
English | 19
1 609 92A 4PE | (25.10.2018)