Product Description And Specifications; Intended Use; Product Features - Bosch LR 1 Professional Notice Originale

OBJ_DOKU-27392-004.fm Page 14 Thursday, December 17, 2015 4:56 PM
14 | English
 Keep the measuring tool away from magnetic data medium and magnetically-
sensitive equipment. The effect of the magnet plate 4 can lead to irreversible da-
ta loss.
 Have the measuring tool repaired only through qualified specialists using
original spare parts. This ensures that the safety of the measuring tool is main-
tained.
 Do not operate the measuring tool in explosive environments, such as in the
presence of flammable liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
 Read and strictly observe the safety warnings in the operating instructions of
the rotational laser.

Product Description and Specifications

Please unfold the fold-out page with the representation of the measuring tool and
leave it unfolded while reading the operating instructions.

Intended Use

The measuring tool is intended for swift finding of rotating laser beams in the wave-
length listed in the "Technical Data".
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 On/Off button
2 Button for selecting the measuring accuracy
3 Audio signal button
4 Magnet plate
5 Centre mark
6 Reception area for the laser beam
7 Display
8 Laser receiver spirit level
9 Latch of battery lid
10 Serial number
11 Battery lid
12 Retainer openings for holder
1 609 92A 275 | (17.12.15) Bosch Power Tools