Product Description And Specifications; Intended Use; Product Features - Bosch PBD 40 Notice Originale

Symbols and their meanings
Laser radiation
Laserstrahlung
Do not look directly into the
nicht in den Strahl
blicken
Laser Klasse 2
beam
IEC 60825-1:2014
<1mW 650nm
Laser class 2
Tie back long hair.
Do not wear protective gloves.
Do not wear loose clothing or
jewellery.
Wear safety goggles.
On/off switch
Quick stop
Speed diagram
The diagram shows the speed that should be set (rpm) de-
pending on the drill diameter (dia. in mm) for the materials
Steel and Aluminium.
Bosch Power Tools
Product description and
specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is suitable for drilling in wood, metal, ceramic
and plastic using the appropriate application tools.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
(2)
(3)
(4)
(5)
(6)
Switching Off
(7)
(8)
Switch on the display
(9)
(10)
Drilling
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Base plate
Quick-clamping lever
Quick-action clamp
Drill column
Rack
Speed diagram
Clamping lever for height adjustment
Clamping lever for depth stop
Depth stop
Laser warning label
Hand wheel
Drive unit
On/off switch with quick stop function
Display
Speed regulator
Keyless chuck
A)
Application tool
Mounting holes
Parallel guide
Wing bolts of the parallel guide
Gear selector switch
Lighting and laser unit
Hex key (4 mm)
Fastening screw for the drill column
Guide pin for the drill column
Guide groove for the base plate
Securing ring
Retaining ring
Clamping sleeve
Light button
Laser cross button
Laser beam output
1 609 92A 4N5 | (25.09.2020)
English | 19