Drill Safety Warnings - Bosch PBD 40 Notice Originale

18 | English
Service
Have your power tool serviced by a qualified repair
u
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.

Drill safety warnings

The drill must be secured.A drill that is not properly se-
u
cured may move or tip over and may result in personal in-
jury.
The workpiece must be clamped or secured to the
u
workpiece support. Do not drill pieces that are too
small to be clamped securely. Holding the workpiece by
hand during operation may result in personal injury.
Do not wear gloves. Gloves may be entangled by the ro-
u
tating parts or chips leading to personal injury.
Keep your hands out of the drilling area while the tool
u
is running. Contact with rotating parts or chips may res-
ult in personal injury.
Make sure the accessory is rotating before feeding
u
into the workpiece. Otherwise the accessory may be-
come jammed in the workpiece causing unexpected
movement of the workpiece and personal injury.
When the accessory is jammed, stop applying down-
u
ward pressure and switch off the tool. Investigate and
take corrective actions to eliminate the cause of the
jam. Jamming can cause unexpected movement of the
workpiece and personal injury.
Avoid generating long chips by regularly interrupting
u
downward pressure. Sharp metal chips may cause en-
tanglement and personal injuries.
Never remove chips from the drilling area while the
u
tool is running. To remove chips, move the accessory
away from the workpiece, switch off the tool and wait
for the accessory to stop moving. Use tools such as a
brush or hook to remove chips. Contact with rotating
parts or chips may result in personal injury.
Accessories with speed ratings must be rated at least
u
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed
can break and fly apart.
The power tool is delivered with a laser warning sign
u
(see table: "Symbols and their meaning").
Never make warning signs on the machine unrecognis-
u
able.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not make any modifications to the laser equip-
u
ment.
1 609 92A 4N5 | (25.09.2020)
Do not let children use the power tool unsupervised.
u
They could accidentally blind someone
If the text of the laser warning label is not in your na-
u
tional language, stick the provided warning label in
your national language over it before operating for the
first time.
Secure the power tool on a stable, even and horizontal
u
surface. If the power tool can slip or shake, the applica-
tion tool cannot be operated evenly and safely.
Never leave the tool unattended before it has come to
u
a complete stop. Cutting tools that are still running can
cause injuries.
Keep the work surface clean, including the workpiece.
u
Sharp-edged drilling chips and other objects may cause
injury. Material mixtures are particularly hazardous. Light
metal dust may catch fire or explode.
Select the correct rotational speed before starting
u
work. The rotational speed must be appropriate for
both the drilling diameter and the material you intend
to drilled. If an incorrect rotational speed is selected, the
application tool may become jammed in the workpiece.
Do not touch the application tool after working before
u
it has cooled. The application tool becomes very hot
while working.
Check the cable regularly and have a damaged cable
u
repaired only by an authorised customer service
agent for Bosch power tools. Replace damaged exten-
sion cables. This will ensure that the safety of the power
tool is maintained.
Store the power tool safely when it is not in use. The
u
storage location must be dry and lockable. This pre-
vents the power tool from storage damage, and from be-
ing operated by untrained persons.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Bosch Power Tools