Charging/Discharging With Bid Chip/Key; End Of Charging/Discharging; Displaying The Charging/Discharging Data - Multiplex Power Peak B6 EQ-BID Notice D'utilisation

8.5

CHARGING/DISCHARGING WITH BID CHIP/KEY

While charging or discharging, the most important data are stored on the chip/key.
9.

END OF CHARGING/DISCHARGING

The charger automatically finishes a charging or discharging operation precisely at the
correct time. The processor takes into account the charging parameters. The optimum
process is used for each type of battery.
9.1

DISPLAYING THE CHARGING/DISCHARGING DATA

Charged-in
Status display
or discharged
capacity
Actual battery
voltage
Battery type
Operating Instructions
Power Peak ® B6 EQ-BID
First connect the BID chip/key via the adapter lead
or directly to the charger. The display shown oppo-
site then appears.
If the charging parameters on the chip are OK, press
the ENTER button to prepare the charging/dischar-
ging process. The further procedure is identical
to that used for a manual start. This procedure is
described in Section 7.4.
Elapsed char-
ge / discharge
time
Charge /
discharge
current
21 53
The corresponding values are conti-
nuously shown in the working display
during a charging or discharging operation
(see Section 5.2).
Successful conclusion of the charging pro-
cess is signalled acoustically. As shown in
the illustration opposite, the most impor-
tant data are shown in the display.
# 30 8561