Programming Chip/Key - Multiplex Power Peak B6 EQ-BID Notice D'utilisation

8.2 PROGRAMMING CHIP/KEY (EXAMPLE: PROGRAMMING THE DATE)
All parameters can then be specified by following exactly the same procedure as for setting
the parameters in manual mode (see Section 7.2). To keep track of the data, a date can be
Operating Instructions
Power Peak ® B6 EQ-BID
Inser chip/key. Press ENTER to confirm EDIT menu.
Press ENTER to confirm the DATE menu item, the
signs the year flashes in the top line. It can be upda-
again the months flashes and can be edited with the
setting is finally confirmed by pressing ENTER.
Confirm the FINISH menu item by pressing ENTER
so that the new values are permanently stored on
to the BID chip. A safety query will appear if data
are changed during entry. To save the data, you
must set the answer to ‚YES' with the ‚+' or ‚-'
button and then confirm by pressing ENTER.
The double beep indicates that the change has
been stored successfully. Answer the safety query
adopted. In both cases, the programming display is
shown again.
19 51
# 30 8561