Specific Safety Rules; Functional Description - Milwaukee 5383-21 Manuel De L'utilisateur

1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors. Exposure to noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
5. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
6. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Symbology
Double Insulated
Alternating Current
Amps
No Load Revolutions per
Minute (RPM)
BPM
Blows per Minute (BPM)
Underwriters Laboratories, Inc.
Canadian Standards Association
Mexican Approvals Marking
1. Side handle
2. Depth guage
3. Clamping screw
4. Forward/Reverse lever
5. Trigger
6. Selector lever
7. Bit holder release collar

SPECIFIC SAFETY RULES

Cat.
Volts
No.
A C Amps
5383-21
120 6

FUNCTIONAL DESCRIPTION

3
2
1
7
Specifications
Tool
(steel or wood)
No Load No Load Blows
RPM
per Minute
0 - 1270
5400
6
5
Capacities
Drill Only
Rotary Hammer
(concrete)
Twist Carbide Tipped
Drill Bit Percussion Bit
3/8" - 1-1/8" 3/4"
4
page 3