Specific Safety Rules; Functional Description - Milwaukee HAWK 5362-1 Manuel De L'utilisateur

1. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
2. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
3. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
4. Keep hands away from all cutting edges and moving parts.
5. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE Service facility for a
free replacement.
6. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Underwriters Laboratories, Inc.
Canadian Standards
Association
Mexican Approvals Marking
BPM
Blows per Minute (BPM)
Volts Alternating Current
Amps
No Load Revolutions per
Minute (RPM)
1. Side handle
2. Depth gauge clamp
3. Forward/Reverse switch
4. Trigger
5. Handle
6. Cord
7. Hammer/Drill collar
8. Chuck collar
9. Dust shield
10. Depth gauge
page 4

SPECIFIC SAFETY RULES

Tool
Cat. Volts
No. AC Amps
5362-1 120 6.8
5362-6 120 6.8

FUNCTIONAL DESCRIPTION

1
10
9
8
7
Specifications
Drill Only
(steel or wood)
No Load
No Load Blows/ Twist
RPM Minute Drill Bits
0-900 0-4500 1/2"
0-900 0-4500 1/2"
2
3
6
Capacities
Rotary Hammer
(concrete)
Carbide-Tipped Thin Wall
Percussion Percussion
Bits Core Bits
3/16" - 1" 3-1/2"
3/16" - 1" 3-1/2"
4
5