FIOR & GENTZ NEURO LOCK Notice D'utilisation page 31

Risk of Falling Due to Incorrectly Adjusted Step Lock Function
For a properly working step lock function, use:
- the 5° step lock stop disc with the 5° extension stop;
- the 0° step lock stop disc without extension stop or with the corresponding 10°, 20° or 30° extension
stop.
Damage to the Anatomical Joint Due to Incorrect Position of the Joint's Mechanical Pivot Point
Determine the joint's mechanical pivot points correctly in order to avoid a permanent incorrect load on the
anatomical joint. Please refer to the online tutorials on our website or contact Technical Support.
Jeopardising the Therapy Goal by Not Providing the Necessary Free Movement
Check if the system joint moves freely in order to avoid restrictions of the joint function. Use suitable
sliding washers according to the information in these instructions for use.
Limitation of the Joint Function Due to Improper Processing
Errors in processing can impair the joint function. Pay particular attention to:
- correctly connecting the system side bar/system anchor with the system case in accordance with the
production technique and
- adhering to the maintenance intervals.
Failure of the Lock Function Due to Incorrectly Mounted Lever Extension
Adhere the lever extension to the locking pawl as described in these instructions for use.
Damage to the System Joint Due to Incorrect Filing
When filing the flexion stop, proceed carefully in order to avoid predetermined breaking points (burrs,
edges). Pay attention to the laser markings.
WARNING
WARNING
WARNING
NOTICE
NOTICE
NOTICE
31