Charge Vehicle; Authorization; Starting The Charging Process - Mennekes AMTRON Xtra Manuel D'utilisation

5.3 Charge vehicle

T
T
WARNING
Risk of injury by unsuitable aids
Use of adapter plugs, extensions, or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adapter plugs, extensions, or additional
charging cables to charge the vehicle.
Depending on the configuration, the device can be used
with or without prior authorisation.

5.3.1 Authorization

Charging without authorisation
If the device was configured during the setting-up process
that no authorisation is required, the charging process
starts automatically after connecting the charging cable to
the vehicle.
In "SCU" mode, charging without authorization is
not possible.
Authorisation with RFID card
f Hold the RFID card in front of the RFID symbol on the
front panel.
9 After successful authorization, the device is ready for
charging and can be started by inserting the charging
cable into the device.
If charging does not start within the release time
of approximately 60 seconds, the authorisation
is reset and the charging system changes to sta-
tus "Ready for operation". A new authorisation is
required.
20
Authorization via MENNEKES Charge APP
You can also authorize yourself by selecting an RFID card
from the whitelist. To do this, you need the PIN2 (whitelist
PIN).
The device then responds as if you have authorised direct-
ly at the device with a valid RFID card.

5.3.2 Starting the charging process

Fig.: 9. Insert the charging cable
f Unroll the charging cable completely.
f Connect the charging cable to your vehicle.
f If necessary, authorize.
f If necessary, connect the charging cable to the device.
For the version type 2 charging socket with shutter:
f Insert the plug into the type 2 charging socket on the
device. The contour of the grey ring indicates the orien-
tation of the plug.
f Turn charging plug 60° counterclockwise to open the
shutter.
f After opening the shutter, insert the charging plug com-
pletely into the charging socket.