Observing Ambient Conditions; Proper Use Of Charging Cable; Keeping Order; Product Description - Mennekes AMTRON Xtra Manuel D'utilisation

Masquer les pouces Voir aussi pour AMTRON Xtra:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87

2.4.4 Observing ambient conditions

If the permissible ambient conditions are not adhered to,
the functionality and operational safety of the device is
affected. This can cause accidents and severe injuries to
people. Observe the following environmental conditions:
f Avoid direct sunlight.
If necessary, install the weather protection cover.
f Keep the ambient temperature from -25 to +40 °C.
f Avoid penetration of water.
f Avoid strong temperature fluctuations.
f Ensure adequate ventilation of the unit and avoid
heat accumulation.
f Keep device away from heat sources.

2.4.5 Proper use of charging cable

Improper handling of the charging cable can cause haz-
ards such as electric shock, short circuit or fire.
f Do not touch the contact pins.
f Do not use adapter connectors or extension cables.
f Avoid kinks, sharp edges, loads and impacts.
f Avoid accumulation / knotting of the charging cable.
f Unroll the charging cable completely when charging.
f Remove the charging cable only by pulling the plug
from the charging socket.
f Keep small animals away from the charging cable.
Use protective flap.
f Do not expose the charging cable to tensile stress.

2.4.6 Keeping order

A charging cable lying around presents a stumbling haz-
ard.
Objects on the device may fall.
f Minimize stumbling hazard.
f After charging store the charging cable properly or
use the cable suspension.
f Do not store any objects on the device.

3. Product description

The devices may differ due to customer or country-specific
requirements. Depending on the model, the device may
differ visually from the illustrations in this guide.
3.1

Delivery content

Fig.: 1. Delivery content
1. Device
2. RFID cards (2× master, 3× user)
3. Hex wrench
4. Bag with installation hardware
(screws, dowels, sealing plugs)
5. Operating manual
6. Installation manual
7. Set-up data sheet
8. Drilling jig
Optional
1)
Without set-up data sheet, access to certain func-
tions and the configuration is not possible.
f Keep the device data sheet in a safe place.
f Contact the MENNEKES support if you have
lost it.
Î „1.1 Service"
1)
5
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Amtron premium

Table des Matières