HBM PMX Guide Rapide page 16

Quick start
14
Notice
The transducers can also be connected if you have previ­
ously connected the voltage supply.
3. Connect the voltage supply (10 ... 30 V DC)
The PMX boots and then displays its system status. The
system LED must light up green. This process takes a
few seconds.
At least 15 W of power must be supplied.
4. Connect the PMX to a PC (HOST)
The PMX is set to DHCP (automatic address assignment)
at the factory. Set the PC (HOST) to DHCP as well. Auto­
matic adjustment and setting of the IP addresses will then
follow. This process takes a few seconds.
Call the PMX web server by entering "PMX" in the
browser bar and press RETURN.
The PMX announces itself with a start screen (Overview)
A3259-4.0 HBM: public
Á
PMX