Technical Data; Starting Operation - Bosch GHG 660 LCD Professional Notice Originale

OBJ_BUCH-485-002.book Page 16 Wednesday, November 26, 2008 11:54 AM
16 | English

Technical Data

Hot Air Gun
Article number
Rated voltage
Rated power input
Air flow
Temperature at the nozzle outlet (approx.)
Temperature-measuring accuracy
– at the nozzle outlet
– on the display
Display operating temperature*
Weight according to EPTA-Procedure 01/2003
Protection class
* The display can turn black when not within the operating temperature.
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.
Operation

Starting Operation

Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Switching On and Off
To switch on the power tool, push the On/Off
switch 3 to the position
page 17) or (see "Hot-air Stage", page 17).
In both positions, the power tool will start with
the previous set air-flow and temperature values.
To switch off, push the On/Off switch 3 to the
stop in position "0".
After working for a longer period at a high tem-
perature, operate the power tool for a short pe-
riod in the cool-air stage
Thermal-protection shut-off: In case of overheat-
ing (e.g. due to air build-up), the power tool auto-
matically shuts off the heating system, but the
1 609 929 S53 | (26.11.08)
blower will continue to run. When the power tool
has cooled down to the operating temperature,
the heating system is automatically switched on
again.
Regulating the Air flow
The air flow can be regulated with the air-flow
control button 8:
To increase the air flow, press on the "+" of the
(see "Cool-air Stage",
air-flow control button 8, to decrease the air
flow, press on the "–".
Briefly pressing the air-flow control button 8 at
the respective position increases or decreases
the air flow by one step. Prolonged pressing of the
air-flow control button continuously increases or
decreases the air flow until the button is released,
or the maximum or minimal air flow is reached.
before switching off.
As an example, reduce the air flow when the sur-
rounding area of a workpiece is not to be heated
excessively or when a light workpiece could be
moved away by the air flow.
GHG 660 LCD
Professional
0 601 944 7..
V 220–240
W 2300
l/min 250–500
°C 50–660
±5 %
±5 %
°C –20...+70
kg 1.0
/II
Minimal air flow
Maximum air flow
Bosch Power Tools
GHG 660 LCD
Professional
0 601 944 7..
110–120
1400
250–500
50–600
±5 %
±5 %
–20...+70
1.0
/II