Functional Description; English | 15 - Bosch GHG 660 LCD Professional Notice Originale

OBJ_BUCH-485-002.book Page 15 Wednesday, November 26, 2008 11:54 AM

Functional Description

While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The power tool is intended for the forming and
welding of plastic, removal of paint and the
warming of heat-shrinkable tubing. It is also suit-
able for soldering and tinning, loosening of ad-
hesive joints and the defrosting of water lines.
Use the machine only when you can fully assess
all functions and handle them without limitation,
or after having received appropriate instructions.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Standing surface
2 Cover with coarse-debris filter
3 On/Off switch with stage selector
4 Nozzle
5 Heat protection collar
6 Program-selection button
7 Display
8 Button for air-flow control
9 Button for temperature control
10 Save button
11 Wide jet nozzle*
12 Glass protection nozzle*
13 Reflector nozzle*
14 Welding rod*
15 Welding shoe*
16 Reduction nozzle*
17 Heat-shrinkable sleeve*
18 Angle nozzle*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools
Noise Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is lower than 70 dB(A).
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents:
EN 60335 according to the provisions of the
directives 2006/95/EC, 2004/108/EC.
03
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Leinfelden, 05.10.2007
1 609 929 S53 | (26.11.08)

English | 15