Technical Data - Bosch GST Professional 135 CE Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-660-001.book Page 9 Wednesday, March 12, 2008 11:13 AM

Technical Data

Jigsaw
Article number
Stroke rate control
Stroke rate preselection
Rated power input
Output power
Stroke rate at no load n
0
Stroke
Cutting capacity, max.
– in wood
– in aluminum
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
Assembly
Before any work on the power tool itself,
pull the mains plug.
Replacing/Inserting the Saw Blade
When mounting the saw blade, wear protec-
tive gloves. Danger of injury when touching
the saw blade.
Selecting a Saw Blade
An overview of recommended saw blades can
be found at the end of these instructions. Use
only T-shank saw blades. The saw blade should
not be longer than required for the intended cut.
Use a thin saw blade for narrow curve cuts.
Inserting the Saw Blade (see figure A)
If required, remove the dust cover 18 (see "Dust
Cover").
Insert the saw blade 15 (teeth in cutting direc-
tion) into the stroke rod until it latches 17.
Bosch Power Tools
GST 135 CE
Professional
0 601 510 7..
–
W 720
W 310
spm 500 – 2800
mm 26
mm 135
mm 20
mm 10
° 45
kg 2.6
/ II
While inserting the saw blade, pay attention that
the back of the saw blade is positioned in the
groove of the guide roller 14.
17
13
14
Note: If the grooves of the saw blade holder are
not in the position shown in the figure or when
the Precision Control guide cheeks 13 are closed,
then the saw blade 15 cannot be inserted into the
stroke rod 17. Briefly press the SDS clamping le-
ver 19 toward the side and release it again.
Check the tight seating of the saw blade.
A loose saw blade can fall out and lead to
injuries.
1 609 929 N52 | (12.3.08)
English | 9
GST 135 BCE
Professional
0 601 511 7..
720
310
500 – 2800
26
135
20
10
45
2.7
/ II