Technical Data; Auxiliary Handle - Bosch Professional GBH 2-22 S Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-795-001.book Page 9 Monday, June 23, 2008 4:31 PM

Technical Data

Rotary Hammer
Article number
Speed control
Right/left rotation
Rated power input
Output power
Impact rate
Impact energy per stroke
Rated speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries,
these values can vary.
Please observe the article number on the type plate of your power tool. The trade names of individual tools may vary.
Assembly
Before any work on the power tool itself,
pull the mains plug.

Auxiliary Handle

Operate your power tool only with the
auxiliary handle 11.
Rotating the Auxiliary Handle (see figure A)
The auxiliary handle 11 can be set to any position
for a secure and low-fatigue working positure.
Turn the bottom part of the auxiliary handle 11 in
counterclockwise direction and swivel the auxil-
iary handle 11 to the desired position. Then re-
tighten the bottom part of the auxiliary handle 11
by turning in clockwise direction.
Bosch Power Tools
GBH 2-22 S
Professional
0 611 250 0..
–
–
W 620
W 280
bpm 4400
J 2.2
rpm 1000
SDS-plus
mm 43 (Euro-Norm) 43 (Euro-Norm)
mm 22
mm 68
mm 13
mm 30
kg 2.3
/ II
Adjusting the Drilling Depth (see figure B)
The required drilling depth X can be set with the
depth stop 10.
Press the button for the depth stop adjustment 9
and insert the depth stop into the auxiliary
handle 11.
The knurled surface of the depth stop 10 must
face downward.
Insert the SDS-plus drilling tool to the stop into
the SDS-plus tool holder 1. Otherwise, the mov-
ability of the SDS-plus drilling tool can lead to
incorrect adjustment of the drilling depth.
Pull out the depth stop until the distance be-
tween the tip of the drill bit and the tip of the
depth stop correspond with the desired drilling
depth X.
English | 9
GBH 2-22 E GBH 2-22 RE
Professional Professional
0 611 250 6.. 0 611 250 7..
–
620
280
0 – 4400 0 – 4400
2.2
0 – 1000 0 – 1000
SDS-plus SDS-plus
43 (Euro-Norm)
22
68
13
30
2.3
/ II
1 619 929 565 | (23.6.08)
620
280
2.2
22
68
13
30
2.3
/ II