Supplied Accessories - Sony SnapLab UP-CR10L Mode D'emploi

Preparations

Supplied Accessories

Make certain you have received the following accessories:
Paper Tray (1)
∗1)
Paper Holder
∗2)
Cleaning Cartridge (1)
Ferrite Core (1)
CD-ROM (1)
Service and Customer Support Information (1)
Operating Instructions (1)
Software License Agreement (1)
Warranty Card (1)
∗1) The paper holder is stored in the printer. Be sure to remove the paper
holder from the inside of the printer before turning the power on.
∗2) For information on use, refer to the operating instructions supplied with
the cleaning cartridge.
Notes
• When taking the unit out of the carton box, be careful not
to hurt your back.
• The packaging materials are needed when transporting
the unit, so we suggest you keep them.
Power Cord (1)
These accessories are stored in the paper holder.
Paper Core (1)
Chapter
Adaptor (left,1)
• Before transporting the unit, remove the ribbon cartridge
and paper roll from the unit.
Adaptor (right,1)
Supplied Accessories
7