Specification; Temperature; A1000Xp - Hach A1000 Manuel D'utilisation De Base

C80 controller

Specification

Details
Dimensions (W x D x H) 8.1 x 4.8 x 12.0 cm (3.2 x 1.9 x 4.7 in.)
Weight 0.75 kg (1.5 lb)
Enclosure Aluminum, splash and drip resistant
Installation category II
Pollution degree 2
Protection class I
Operating temperature 5 °C to 40 °C (41 °F to 104 °F)
Humidity 0 to 90% relative humidity, non-condensing
Altitude 4000 meters (13,125 ft) maximum
Power requirements 120/230 VAC, 50/60 Hz, 7.6 W
Display 4 line x 16 character super twist LCD with 8 bi-color
(red/green) LEDs
Safety rating Certified to UL and CSA safety standards by CSA.
Marked with cCSAus and CE.
A1000 and A1000XP analyzers
Specification A1000
Dimensions S10: 106 x 112 x 330 mm
(4.2 x 4.4 x 13.0 in.)
(W x D x L)
S20P: 172 x 112 x
330 mm (6.8 x 4.4 x
13.0 in.)
Weight S10: 6.5 kg (12.75 lb)
S20P: 7 kg (14 lb)
3
A1000 S10 and A1000XP-S models only
4 English
Specification
Enclosure
Enclosure rating
Installation category
Pollution degree
Protection class
Power requirements
Power cord
(100–120 VAC main)
Power cord
(208–230 VAC main)
Operating

temperature

Sample flow rate
Sample pressure
Humidity

A1000XP

XP-S: 106 x 112 x 330 mm Altitude
(4.2 x 4.4 x 13.0 in.)
Analysis cell volume
XP: 172 x 112 x 330 mm
(6.8 x 4.4 x 13.0 in.)
Display
XP-S: 6.5 kg (12.75 lb)
XP: 7 kg (14 lb)
A1000
ABS front panel with Lexan
resistant
Indoor use only.
II
2
I
100-240 VAC ±10%, 50/60 Hz, 2/1 A
Rating: 125 VAC, 10 A
Foil shield 100%; braid shield 85%
Connectors: IEC 320–C13 and NEMA 5–15P
Rating: 250 VAC, 10 A
Foil shield 100%; braid shield 85%
Connectors: IEC 320–C13 and CEE 7/7 or CEI
23–16/VII (or like, depending on country)
5 to 35 °C (41 to 95 °F)
60–300 mL/minute
100 psig (690 kPa) maximum
0–95% relative humidity, non-condensing
2000 m (6562 ft) maximum
7.5 mL
3
1 line x 16 character Super-Twist LCD with yellow
backlight (adjustable), 0.163 in. characters
A1000XP
® overlay, splash and drip