Receive A Call - JVC KD-R975BTS Manuel D'instructions

BLUETOOTH®
Auto Pairing
When you connect the following device to
the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
KD-R770BT: Android device
Other models: iPhone/ iPod touch/ Android
device
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [AUTO CNNT] is set to [ON]. ( 18)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:
• For KD-R975BTS / KD-R970BTS / KD-RD97BT / KD-R97MBS:
The buttons will blink in the color you have selected in [RING COLOR]. ( 16)
For KD-R875BTS / KD-R870BT / KD-R770BT / KD-RD87BT:
The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 16)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 16)
During a call:
• For KD-R975BTS / KD-R970BTS / KD-RD97BT / KD-R97MBS:
The buttons stop blinking and illuminate in the color you have selected in [RING COLOR]. ( 16)
For KD-R875BTS / KD-R870BT / KD-R770BT / KD-RD87BT:
The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate
First incoming call...
Answer a call
Press
Reject a call
Press and hold
volume knob.
End a call
Press and hold
volume knob.
On the remote control
Press
or the volume knob.
Press and hold
or the
Press and hold
or the
.
.
.
15
ENGLISH