Cleaning; Storage; Trouble-Shooting - SilverCrest SMZS 260 D3 Mode D'emploi

__RP88609_B1.book Seite 48 Dienstag, 15. Januar 2013 3:30 15

7. Cleaning

Clean the device prior to its first use!
DANGER! Risk of electric shock!
• Pull the mains plug 2 out of the wall sock-
et before you clean the multi chopper.
• The motor block 3, the power cable
and the mains plug 2 must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
When washing manually, the water should
be sufficiently clear that you can see the
blade insert 6 easily.
WARNING! Risk of material damage!
Do not use any astringent or abrasive clean-
ing agents.
Dismantling the device
1. Pull out the mains plug 2.
2. Remove the motor block 3.
3. Rotate the working cover 4 anti-clock-
wise and remove it.
4. Carefully remove the blade insert 6 (if
necessary together with the cream at-
tachment 5) from the vessel 7.
5. Figure A: Carefully press the blade
insert 6 downwards out of the cream at-
tachment 5.
6. Remove the vessel cover 9 from the ves-
sel 7.
How to clean properly
1. If necessary, wipe down the motor
block 3 and the power cable 2 with a
damp cloth. Ensure that the motor
block 3 is completely dry before the
next time it is used.
2. Rinse all accessory parts manually, ex-
cept for the motor block 3.
3. Allow all parts to dry completely before
you put them away or use the device
again.
48 GB
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
types of food, you should immediately
rinse the blade insert|6 thoroughly.

8. Storage

DANGER for children! Keep the
device out of the reach of children.
DANGER! In order to avoid accidents, the
mains plug 2 must never be connected to a
wall socket while in storage.
• Assemble the multi chopper for storage
purposes. This allows the blade insert 6
to be stored safely.
• Select a location where neither high
temperatures nor moisture can affect the
device.

9. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric shock!
Do not attempt to repair the device
yourself under any circumstances.
Possible causes/
Fault
• Has the device been
connected to the pow-
er supply?
No function • Check the connection.
• Is the top edge of the
working cover 4
clean?
Action