Operation - Husqvarna AUTOMOWER 105 Manuel D'utilisation

Masquer les pouces Voir aussi pour AUTOMOWER 105:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Messages
Applicable for Automower
305/310/315/315X/420/430X/440/450X
Historical fault and information messages
can be read in this menu. For some of the
most common fault messages, there are
tips and advice to help you rectify the
fault.
Weather timer
Applicable for Automower
420/430X/440/450X
This function allows the product to
automatically adjust its mowing times
based on how much the lawn grows.
When the weather is good for grass
growth, the product mows more often and
when grass growth is low the product
automatically spends less time on the
lawn.
Installation
This menu function is used to customize
the installation. For many work areas
there is no need to alter the factory
4.1 To switch on, stop and switch off
the product
The product can only start if it is switched on and
the correct PIN code has been entered. To switch
®
on the Automower
305, push the ON/OFF button
for 3 seconds and check that the indicator lamp is
lit. To switch on all other models, set the main
switch to
1 .
To stop to product, push the STOP button on top
of the product. The product stops and the blade
motor stops.
To switch off Automower
button for 3 seconds and check that the indicator
lamp is not lit. To switch off all other models, the
0 .
main switch is set to
4.2 Operating mode Automower
Push the Operation selection button 1-3 times to select
an operating mode. You can select between 3 different
operating modes.
HOME . Sends the product to the charging station.
It remains here until another operation mode is
selected. When the battery is fully charged, the
product will not leave the charging station and
1418 - 007 - 17.09.2020
®
®
305/315/315X/

4 Operation

®
305, push the ON/OFF
®
105
settings, but depending on the lawn
complexity the mowing result can be
improved by making manual settings.
Settings
This selection allows you to make
changes to the general product settings
such as date and time. You can also
ECO mode and Spiral
switch on/off
cutting , or save your settings in different
Profiles (Automower
420/430X/440/450X only). Husqvarna
recommends to let
switched on to save energy and avoid
interference with other equipment.
Accessories
Applicable for Automower
305/310/315/315X/420/430X/440/450X
This menu handles the settings for the
product accessories, for examples
®
Automower
Connect or Automower
Connect@Home. Contact your local
Husqvarna representative for information
on what accessories are available for your
product.
begin mowing until the operation selection is
AUTO .
altered to
AUTO . The standard, automatic operation mode
where the product mows and charges
automatically.
MAN . When mowing secondary areas the MAN
setting must be used. If
product is started when it is out on the lawn, it
mows until the battery runs out. It then stops and
the 'Needs manual charging' message appears.
The product must then be moved manually to the
charging station and then started manually after
charging. If the product charges in the
it will fully charge, move about 20 cm / 8 in. out of
the charging station and then stop. This indicates
that it is charged and ready to start mowing.
4.3 Operating mode, START
®
Automower
305/310/315/315X/
420/430X/440/450X
Push the START button to select one of the following
operating modes:
Main area: The standard operating mode where
the product mows and charges automatically.
®
305/315/315X/
ECO mode be
®
®
MAN is selected and the
MAN mode,
Operation - 15

Publicité

Table des Matières
loading

Table des Matières